If your new job requires you to operate a forklift, make sure you pay attention to the training you’ll receive. Those training sessions will help protect you from serious injuries. Statistics show that about 100,000 workers are injured in forklift accidents each year. Proper training procedures can help prevent you from becoming a statistic. In addition to the operational training you’ll receive, you’ll also need to know what to do in the event of a tip-over — when forklifts become unstable and tip over. Here are three simple steps you can take to protect yourself from tip-over injuries.
You might not think much about it, but your seat belt is your first line of defense against injuries. As soon as you sit down behind the wheel of your forklift, buckle up. Make sure that the belt is tightened around you. In the event of a tip-over, a tightened seat belt will keep you in your seat, which will help reduce injuries.
Stay Inside the Forklift
If your forklift tips over, your first instinct may be to jump out. However, that’s exactly what you should not do. Trying to jump from the forklift could increase your chances of being injured or worse. When you jump from a forklift as it’s tipping, you face a couple of different risks. First, your clothing could get caught, causing you to slam back against the forklift. Second, the forklift could change directions, causing you to get caught under the machine. Protect yourself by remaining inside the cage until the forklift comes to a halt.
Prepare for the Fall
As soon as you know that your forklift is going to tip, you need to prepare yourself for the fall. Proper preparation can help you reduce your risk of injuries. First, place your feet firmly on the floor of the forklift. Second, place both hands on the steering wheel. Third, push into the steering wheel with your hands to press your back into the seat. Finally, hold tight until the forklift stops moving. This will allow you to brace for impact. It will also help keep you inside the cage.
If you’re going to be operating a forklift, make sure you follow the safety procedures you’ll learn during your training sessions. Be sure to use the tips provided here to protect yourself during a tip-over accident. You can also talk to a company like Crown Equipment about forklifts and forklift safety.
If you are a company that does construction work, you might get into a situation where you need a crane in order to get a project done but you don’t have one. Your crane might be undergoing repairs or you might be too small of a construction company to actually have purchased your own crane yet. Luckily, you don’t need to turn down the project just because you don’t have a crane. You can rent a crane instead. Here are some tips for renting a crane so that you get one that you need and so that the process is as smooth as possible.
1. Budget in Insurance
Cranes can potentially be dangerous due to the fact that they are lifting objects or people up high. If a crane’s mechanism fails, it could drop the objects and potentially injure someone near the crane or it could drop a person and potentially cause injury to him or her. When you are deciding what type of crane you are going to get or which rental company you are going to go with, be sure that you ask about their insurance plans and factor that information into your choice. You need to be sure that you have adequate budget room left for the insurance.
Before you sign up for an insurance plan, you will need to have someone who specializes in risk assessment take the time to look into the level of insurance that you are going to need. That person will look into the limits of the crane, the condition of the ground on which the crane will stand, and any other issues that could potentially cause the crane to be a danger to those around it.
2. Consider Hiring a Crane Firm Instead
If you are not able to get insurance for your crane rental, consider hiring the services of a crane firm instead. It could be that the cost of renting the crane and getting the insurance that you need to operate the crane safely could be more than simply hiring a professional crane operation firm to simply do this part of the job. You might even be able to rent the crane and have them insure themselves on the crane to save even more money. Look into your other options in order to make your job as profitable as possible.
For more information, talk to a company that specializes in heavy equipment rental. They might have their own risk assessors that you could hire in order to make sure that you are getting the optimum level of insurance. Check out a site like http://soundequipmentrentals.net for more information.
If you are the person who is in charge of making tough decisions about the construction equipment that your business uses, it is important to make sure that everyone who works for you knows how to take care of the equipment. Dirty equipment is often more likely to break down, due to the unit needing to work harder because of the extra weight and problems with more performance are common as the result of dirty connections or clogged pulleys. When you need to make sure that your construction equipment stays in a usable, functional condition for as long as possible, the tips below will be very helpful.
#1-Always Examine The Seals And Gaskets Thoroughly
It is important to note that the seals and gaskets in your construction equipment have often been created in specific ways so that you debris is likely to enter. When a crack or other imperfection develops, the inner working of the machine can quickly become contaminated. As a result, you should be sure to carefully clean or wipe down each part of the construction equipment in question on a regular basis, to prevent contamination.
#2-Make Sure That You Use Adequate Lubricant Everywhere That It Is Needed
A good rule of thumb is that if a mechanical part moves it should be lubricated. Otherwise, friction can quickly become a problem and pricey repairs are likely to follow. However, simply lubricating the moving parts is not sufficient. Instead, you need to be careful as to how you lubricate the item as well.
For example, the live surface on the leaf chain of a forklift is prone to drying. As the area where the two links connect, it is typically under immense strain. Each live surface on each chain will need a few squirts of oil in order to work as they should. Alternatively, it is not unusual for some excavators to have charts to indicate where they should be lubricated. If you simply use heavy grease in a grease gun and follow the directions, you are unlikely to have a problem. If you cannot see the chart, the information may be in the owner’s manual. Since excavators are not all identical, it is best to find recommendations specific to your unit.
In conclusion, construction equipment is expensive and bulky. Repairs are rarely cheap and replacing broken equipment is a significant investment and therefore it is a good idea to apply the advice listed above for appropriate maintenance. Talk to professionals, such as Independent Lift Truck Of Alaska, for more information.
If you are a contractor preparing to purchase heavy construction equipment, you need to understand the importance of getting that equipment appraised. Not only will the appraisal be a vital piece of information for obtaining an asset-based loan, it will also to let you know the condition of the equipment before you make the investment. If you are looking at getting crane appraisals, here are three things you will need to remember.
In order to get a reliable, accurate, and ethical appraisal report, the appraisal company you use should belong to either the Association of Equipment and Machinery Appraisers (AEMA) or the American Society of Appraisers (ASA). Members of either society must demonstrate their proficiency through testing and continuing education which helps add quality to the appraisals they give. It is also a good idea for the appraisal company you use to be a Certified Equipment Appraiser (CEA) and also have Uniform Standards of Professional Appraisal Practice (USPAP) certification.
The appraisal company you use should be able to supply you with a comprehensive appraisal report containing the following bits of information about the crane or cranes you are wanting to purchase:
These comprehensive appraisal reports are necessary as your lender will need to look them over before approving the equipment loan.
There are different types of values used when appraising cranes and other pieces of heavy equipment that you will need to understand. Following are some of those value types:
It should be noted that all of the above value types are the appraisal company’s professional opinion and that all value types are expressed in terms of money.
By finding a credible appraisal company, knowing what should be included in an appraisal report, and understanding the different value types, you will know you are getting a fair appraisal. To learn more, contact a company like Roden Consulting LLC
An air compressor can be an indispensable tool for your next home improvement project. However, it can be common for individuals to make routine mistakes when it comes to caring for these devices. As a result, these individuals may find that their air compressors are more likely to sustain problems. To help your air compressor avoid these issues, you should keep the following few tips in mind.
Drain The Condensation Collector
During the process of compressing air, these devices can generate a substantial amount of condensation. This condensation forms because the compressed air is unable to hold as much moisture. For this reason, air compressors are equipped with a condensation collector. If you fail to empty this collector, you can inadvertently flood the compressor. When this happens, it will likely experience performance issues and develop corrosion. For this reason, you should always follow the owner’s manual’s instructions for draining the condensation collector after each time you use the air compressor. While this may be a slightly inconvenient task for you to do, the damage it can help your air compressor avoid may be more than worth it.
Check The Hoses Before Each Use
While it is in operation, an air compressor can create substantial vibrations. Eventually, it can be possible for these vibrations to cause the hoses that connect to the compressor to come loose. When this happens, air may escape from the hosing, which can cause it to fail to generate enough pressure for your tool. In order to minimize this drain on performance, you should inspect the hoses prior to each use to ensure they are securely held in place and that any metal clamps are tight.
Remove Dust From Any Vents
Dust accumulations can be another potentially serious problem for air compressors. These accumulations can form on the exterior vents of the unit. When this happens, the air flow can become severely restricted, which may prevent the unit from being able to get enough air to function. If you make the mistake of attempting to use the air compressor when the vents are clogged, you can cause the motor to overheat and malfunction. To help eliminate this problem, you will want to carefully remove any dust accumulations that have formed around the vents. You may want to use a vacuum for this task to avoid accidentally knocking the dust into the compressor’s interior. When dust gets inside an air compressor, it can jam the moving parts and result in substantial damage.
Moving a plant comes with several challenges that need to be addressed in a logical, careful manner. No matter what reasons are behind your move, taking the time to plan every detail is important for the relocation to be smooth and without major problems. Once you are settled in a new facility, you should be able to start back your production as though you never skipped a day. Check out these tips for enjoying the most success when relocating your manufacturing facility.
Drawn-Out Floor Plans of Your Current Workplace Are Important
When you hire relocation experts to help you move your facility to a new destination, engineers will take the time to draw out floor plans of the building you are in now. In this way, the current location can be compared to the new location. This will help give engineers ideas about what kind of utilities will be needed for machinery, how much room each machine will need, and more. Even details for things like head cranes and lifts can be included in your layout plans, and this will make it easier to plan out things for the new facility.
Moving Time Is a Good Time for Equipment Overhauls and Assessments
When you move your personal property from one house to another, you may toss out the things you no longer use or need. Likewise, when you move facilities, it is a good time to take a close look at your equipment and machinery. Deciding whether a machine is too old or worn out to take with you is a good idea. Some machines may need refurbishing, while others may be just fine like they are. The information about your machinery can help relocation engineers make decisions about placement in the new facility. For example, one of your machines might require a greater power source than another one, and this could make it extremely important to put things in the proper areas in a new place. Bear in mind that once large machines are placed in your new facility, you won’t be able to move them around, so determining their placement before moving them is vital.
Keeping Heavy Equipment Appropriately Clean Is Important
The trucks moving your facility’s machinery and equipment should have tarp systems for covering your property during transit. If you find your machines and equipment are loaded without tarps covering them, do not allow your equipment to be hauled until this is changed. If dirt and debris get into your machinery, you could end up spending time and money on repairs before you start up production in your new facility. Dirt and debris flying through the air during transport can be a problem for some machines that require users to pay attention to cleanliness. This is especially true for machinery used in a food-processing line.
By taking your time to plan out your relocation to a new workplace, you can look forward to using your new destination and making higher profits rather than to cleaning up the mistakes made during the move. If you are considering plant relocation, discuss the matter with relocation experts so you can find the best way to start planning.
Whether you are the owner of a construction company and you own a whole fleet of heavy equipment or you are simply a contractor who owns an excavator or a dozer, keeping your equipment clean may be far from important in your eyes. Even though it may seem like your heavy equipment works just fine whether it is clean and sparkling or caked in mud and grime, there are good reasons to keep your heavy equipment cleaned. Here are a handful of benefits you will reap by having your heavy equipment regularly cleaned by a pressure washing service.
Prolong the life of your equipment by keeping it clean.
If you are like a lot of business owners who have heavy equipment, you look at a dirty piece of equipment and wonder why you should clean it if you are just going to go and get it dirty again in the coming days. However, caked-on mud, dirt, and grit can actually prevent your equipment from running as it should and may even cause damage down the road. For example, if you have an excavator and there is dirt and grime caked on the scoop, this dirt and grime could cause corrosion over time. Likewise, excessive mud buildup can prevent rolling tracks on a bulldozer or trackhoe from rolling smoothly.
Exude a more professional appearance with clean equipment.
Come rolling up to a proposed customer with equipment that is soiled, caked with mud, and dirty, and they will likely not take you as completely professional. The simple fact of the matter is, the more clean and well-maintained your heavy equipment is, the more professional you will appear in the eyes of your current and prospective customers. When customers see that you are attentive to your equipment, they will automatically assume you will be just as attentive to a project when you are working for them.
Prevent extra property debris during projects.
Try unloading a mud-caked dozer or excavator onto a concrete parking lot and what you will likely end up with is a huge mess to clean up on your customer’s property. Not only will you likely have to clean up the mess when you drop mud and debris during equipment unload, your customers may not be so happy with such a mess. Having your equipment cleaned by a company like T and T Mobile after each project will ensure you don’t make a huge mess and save you time because there will be no extra cleanup involved.
When building a new home, there are many ways that the framing can be done. This is the basic structure that makes up the design of your home; moreover, you may want to have unique features like exposed timbers and custom-designed ceilings. Some of these features can take time if they are made by hand when the carpentry is done. To save time and money, trusses can be a great solution and with the latest computer-aided techniques for designs, you can add any custom features to your home with trusses. Here are some tips to help you give your new home’s interior a unique look with custom designs:
1. Give Your Home An Exposed Timber Look With Trusses
Exposed timber trusses can be a great addition to your home to give it a unique look. This can be just a feature of some of the trusses, or it can be timber trusses for a timber-frame home. If you are looking for a rustic look, this can be a great option for the structure of your home. If you want to have your home built quickly, you can even take the timber-frame plans to a custom truss design service and help them design the truss work and exposed timbers for your new home.
2. Quickly Add Custom Ceilings Like Trays Using Designs In Trusses
There are also other custom designs that can be done with custom trusses. If you want to have features like custom ceilings like trays and archways, this can easily be done with truss work. Even if you are building your home with conventional framing systems, you can contact a custom truss design service to do the ceilings. Doing this can save you time and money installing the ceilings and give you more options for the custom features you want to add to your home.
3. Shapes And Designs That Cannot Be Done With Conventional Wood Framing
Another benefit of trusses is that it can allow you to add shapes and designs that cannot be easily done with conventional framing systems. A good example of this is dome ceilings, which can be costly when done with conventional carpentry due to the labor and materials involved. With trusses, the design is in the truss work and only needs to be put together and finished with a minimal amount of labor.
These are some tips to help you give your home a unique look using custom truss designs. If you are ready to have trusses set for your project, contact a crane service to help get all the trusses for the roof set quickly and easily.
Do you have plans to make first-time arrangements for a heavy construction equipment rental? If so, you may be wondering how much it is going to cost to rent. The total cost of your equipment rental will be based on a number of factors such as the type of equipment rented and the duration of the rental. There are some fees that you may be able to avoid, which could trim your costs. The following are examples of some fees and options you may encounter.
This is the cost that you will likely see advertised. It may be listed as a daily, weekly or monthly price. If you have a project that is expected to be completed in less than a week, it might still be more sensible to opt for a weekly rental. You can always return the equipment sooner than a week if needed, but if your project lasts longer than expected, you might end up paying more if you choose to be billed daily.
This will likely be an optional form of protection for the equipment you rent. If an unfortunate accident occurred or the equipment got damaged while in your possession, this could protect you from additional fees. This is not the same as insurance, and the protection plan will usually offer protection up to a certain dollar amount. For example, the plan might protect you from damage fees up to $500.
You may be expected to return the equipment you rent with a certain amount of fuel in it. Some providers may have a clause in their rental agreements that allow renters to pay for their fuel when they return the equipment. For example, you will likely receive equipment that is full of fuel, and if it is returned below full, you would have to pay the cost of filling the equipment to the provider. Their fuel costs may be slightly different than those of fuel purchased at a retailer.
Some heavy equipment providers may not assess this fee, and others may assign it based on the type of equipment rental. It will likely appear as a flat fee for each piece of equipment or per rental order. The money collected from the fee is used to keep companies compliant with government policies, which can help minimize the impact of environmental harm that can be caused by issues such as waste run-off from equipment.
This is a cost that you could avoid if you have a way to arrange your own pickup and delivery; however, keep in mind whether it will be sensible to do this yourself. For example, if you are renting several pieces of equipment, you might have to make several trips. The rental company could likely make one delivery trip, which can save you time and resources. Delivery fees may be billed at a flat rate up to a certain mileage, and any miles over that might be billed in increments.
Hydraulic cylinders are common components. It is likely that these devices will be a common part of your machine repair expenses. A sizable portion of the hydraulic cylinder failures are a result of poor design. While this may be concerning, it also means that hydraulic cylinder failure is not inevitable and can be prevented.
Bent Cylinder Rods
Cylinder rods are often bent because they do not have enough material strength. This leads to the rods becoming bent. Once they have become bent, a deforming load is placed on the rod seal. This can lead to leakage and cause the seal to fail. This problem can be prevented by using rods that are made of a stronger material.
Dirty Hydraulic Fluid
Another common issue causing cylinder failure is when the hydraulic fluid is not kept clean. A failure to clean the fluid leads to the cylinder failing prematurely and can also lead to seal failure and leaks. Contamination can result from internal contamination, such as when contaminants that come from dirt and wear. External contamination results from a leak in the hydraulic cylinder that allows for contaminants to enter the cylinder. Contaminants can be prevented through adequate filtration.
Seals Wearing Away Over Time
The seals on a cylinder can give away, which can lead to gradual or sudden and catastrophic damage. While most seals will wear away over time, a seal will wear away much more rapidly and cause much more damage if the hydraulic fluids are not kept clean. Through adequate filtration and by using the right hydraulic fluids, you will be able to avoid damage to the seal that can lead to catastrophic failure.
Sometimes, the cylinder will experience ballooning. This is a phenomenon where the wall is not thick enough for the operating pressure of the cylinder. This leads to the proper tolerance between the piston and seal being lost, which can lead to leaks. The problem is solved by making sure that the hydraulic cylinder material is thick enough.
An Improper Rod Finish
The rod finish is essential. If the rod is not rough enough, this can lead to the rod failing earlier as a result of not having enough lubrication. However, if the roughness is too high, this can lead to damage to the hydraulic seal. While these systems should be repaired, it is most important that they be designed properly in the first place. Talk to a repair professional, like http://fivestarhydraulicslv.com, for more help.